End-to-end pins / End-to-end terminals (round type)
The terminals/pins are supplied in an unseparated state wound around a reel. Products of this type are used when inserting terminals directly into printed circuit boards or other such things by using an automatic pin insertion machine. Available in bare or plated.
Request a quote or prototype| Reference standards | φ0.45mm～ |
Applicable shapes of end-to-end pins - round type
Straight round pins with 4-side tapers
Straight round pins with conical tapers
Partially flattened straight pins with conical tapers
Partially pinched straight pins with conical tapers
Straight pins with conical tapers and cross-shaped cross sections
Mid-flanged straight pins with conical tapers
* For details, please refer to "Search by Product Form".
* Specifications, materials, and other details are available upon request.
Related Links
Products with the Same Shape
-
Embossed Taping (terminal pins & tiny components) -
Mid-flanged straight pins with conical tapers -
Straight pins with conical tapers and cross-shaped cross sections -
Partially pinched straight pins with conical tapers -
Partially flattened straight pins with conical tapers -
Straight pins with 4-side tapers from round wires -
Straight pins with conical tapers from round wires -
Partially flattened straight pins with round chamfers -
Partially pinched straight pins with round chamfers -
L-shaped pins (right angle) -
Double-step L-shaped pins -
U-shaped pins -
J-shaped round pins -
Partially flattened L-shaped pins -
High-volume Pins -
Mid-flanged straight pins with round chamfers -
Bandolier terminals / pins made from round wires -
Crank shaped pins -
End-to-end pins / End-to-end terminals (press-fit type) -
End-to-end pins / End-to-end terminals (square type) -
End-to-end pins / End-to-end terminals (round type) -
Block terminals (heat dissipation terminals and block pins) -
Connector Assembly with Wire Terminals -
Surface Treatment (Plating) -
Terminals with solder -
Heat radiating pins for heat sinks -
Rivet (Pin holder, Terminal holder) -
PGA Pins (Terminals for CPUs) -
Lead pins / Diode terminals -
Jumper pins -
Press-fit terminals (from wire) -
Substrate terminals / Post pins -
Antenna Pins -
Quartz resonator terminals (hermetic seal terminals) -
Conductive terminals -
Kovar pins (electrode pins) -
Leadless diode terminals / Dumet pins -
Brazing filler metal cut pieces (gold, silver, copper, etc.) -
Ultra-small pins, extra-fine pins, micro pins -
Plungers for Contact Probes -
Copper Pillar pin -
Copper inlay
Products with the Same Processing Method
-
Embossed Taping (terminal pins & tiny components) -
Press-fit bandolier terminals -
Deep drawn pins / cups -
Pyramidal pins -
U-shaped pins Pyramidal pins -
Crank-shaped pins Pyramidal pins -
J-shaped square pins -
L-shaped pins Pyramidal pins and cross-shaped cross sections -
Swaged L-shaped pins Pyramidal pins and cross-shaped cross sections -
„ear-crush“ flat square with pyramid taper -
Swaged straight pins Pyramidal pins and cross-shaped cross sections -
Straight pins Pyramidal pins and cross-shaped cross sections -
Partially pinched straight pins Pyramidal pins -
Partially flattened straight pins Pyramidal pins -
Straight pins Pyramidal pins -
Mid-flanged straight pins with conical tapers -
Straight pins with conical tapers and cross-shaped cross sections -
Partially pinched straight pins with conical tapers -
Partially flattened straight pins with conical tapers -
Straight pins with 4-side tapers from round wires -
Straight pins with conical tapers from round wires -
Partially flattened straight pins with round chamfers -
Partially pinched straight pins with round chamfers -
L-shaped pins (right angle) -
Double-step L-shaped pins -
U-shaped pins -
J-shaped round pins -
Partially flattened L-shaped pins -
High-volume Pins -
L-shaped pins Pyramidal pins -
Mid-flanged straight pins Pyramidal pins -
Mid-flanged straight pins with round chamfers -
Needle-eye square press-fit -
Bandolier terminals / pins made from square or flat square wires -
Bandolier terminals / pins made from round wires -
Crank shaped pins -
End-to-end pins / End-to-end terminals (press-fit type) -
End-to-end pins / End-to-end terminals (square type) -
End-to-end pins / End-to-end terminals (round type) -
Block terminals (heat dissipation terminals and block pins) -
Terminals with solder -
Heat radiating pins for heat sinks -
Rivet (Pin holder, Terminal holder) -
Hollow Rivet -
PGA Pins (Terminals for CPUs) -
Connector terminals / Connector pins -
Lead pins / Diode terminals -
Jumper pins -
Press-fit terminals (from wire) -
Substrate terminals / Post pins -
Antenna Pins -
Quartz resonator terminals (hermetic seal terminals) -
Conductive terminals -
Kovar pins (electrode pins) -
Leadless diode terminals / Dumet pins -
Brazing filler metal cut pieces (gold, silver, copper, etc.) -
Ultra-small pins, extra-fine pins, micro pins -
Plungers for Contact Probes -
Copper Pillar pin -
Copper inlay -
Electrode Terminals of Rechargeable Battery