Straight pins with conical tapers from round wires
A round pin having conical tapers at both ends.
Making bandolier terminals / pins.
| Reference standards | Pin diameter／φ0.3mm～（in case of bandolier φ0.5mm～） |
| Materials | Brass, phosphor bronze, or other by arrangement |
Main applications
Connectors, switches, etc.
Related Link
Products with the Same Shape
-
Embossed Taping (terminal pins & tiny components) -
Mid-flanged straight pins with conical tapers -
Straight pins with conical tapers and cross-shaped cross sections -
Partially pinched straight pins with conical tapers -
Partially flattened straight pins with conical tapers -
Straight pins with 4-side tapers from round wires -
Straight pins with conical tapers from round wires -
Partially flattened straight pins with round chamfers -
Partially pinched straight pins with round chamfers -
L-shaped pins (right angle) -
Double-step L-shaped pins -
U-shaped pins -
J-shaped round pins -
Partially flattened L-shaped pins -
High-volume Pins -
Mid-flanged straight pins with round chamfers -
Bandolier terminals / pins made from round wires -
Crank shaped pins -
End-to-end pins / End-to-end terminals (round type) -
Block terminals (heat dissipation terminals and block pins) -
Connector Assembly with Wire Terminals -
Surface Treatment (Plating) -
Terminals with solder -
Heat radiating pins for heat sinks -
Rivet (Pin holder, Terminal holder) -
PGA Pins (Terminals for CPUs) -
Lead pins / Diode terminals -
Jumper pins -
Press-fit terminals (from wire) -
Substrate terminals / Post pins -
Antenna Pins -
Quartz resonator terminals (hermetic seal terminals) -
Conductive terminals -
Kovar pins (electrode pins) -
Leadless diode terminals / Dumet pins -
Brazing filler metal cut pieces (gold, silver, copper, etc.) -
Ultra-small pins, extra-fine pins, micro pins -
Plungers for Contact Probes -
Copper Pillar pin -
Copper inlay
Products with the Same Processing Method
-
Embossed Taping (terminal pins & tiny components) -
Press-fit bandolier terminals -
Deep drawn pins / cups -
Pyramidal pins -
U-shaped pins Pyramidal pins -
Crank-shaped pins Pyramidal pins -
J-shaped square pins -
L-shaped pins Pyramidal pins and cross-shaped cross sections -
Swaged L-shaped pins Pyramidal pins and cross-shaped cross sections -
„ear-crush“ flat square with pyramid taper -
Swaged straight pins Pyramidal pins and cross-shaped cross sections -
Straight pins Pyramidal pins and cross-shaped cross sections -
Partially pinched straight pins Pyramidal pins -
Partially flattened straight pins Pyramidal pins -
Straight pins Pyramidal pins -
Mid-flanged straight pins with conical tapers -
Straight pins with conical tapers and cross-shaped cross sections -
Partially pinched straight pins with conical tapers -
Partially flattened straight pins with conical tapers -
Straight pins with 4-side tapers from round wires -
Straight pins with conical tapers from round wires -
Partially flattened straight pins with round chamfers -
Partially pinched straight pins with round chamfers -
L-shaped pins (right angle) -
Double-step L-shaped pins -
U-shaped pins -
J-shaped round pins -
Partially flattened L-shaped pins -
High-volume Pins -
L-shaped pins Pyramidal pins -
Mid-flanged straight pins Pyramidal pins -
Mid-flanged straight pins with round chamfers -
Needle-eye square press-fit -
Bandolier terminals / pins made from square or flat square wires -
Bandolier terminals / pins made from round wires -
Crank shaped pins -
End-to-end pins / End-to-end terminals (press-fit type) -
End-to-end pins / End-to-end terminals (square type) -
End-to-end pins / End-to-end terminals (round type) -
Block terminals (heat dissipation terminals and block pins) -
Terminals with solder -
Heat radiating pins for heat sinks -
Rivet (Pin holder, Terminal holder) -
Hollow Rivet -
PGA Pins (Terminals for CPUs) -
Connector terminals / Connector pins -
Lead pins / Diode terminals -
Jumper pins -
Press-fit terminals (from wire) -
Substrate terminals / Post pins -
Antenna Pins -
Quartz resonator terminals (hermetic seal terminals) -
Conductive terminals -
Kovar pins (electrode pins) -
Leadless diode terminals / Dumet pins -
Brazing filler metal cut pieces (gold, silver, copper, etc.) -
Ultra-small pins, extra-fine pins, micro pins -
Plungers for Contact Probes -
Copper Pillar pin -
Copper inlay -
Electrode Terminals of Rechargeable Battery