Bandolier terminals / pins made from round wires

• Sn reflow plating (pre-plating) specifications
• One-side Au, Sn reflow partial plating (post-plating) specifications

Available sizes, shapes, etc.

Possible pitches: 2.0mm, 2.54mm, 3.0mm～
Please call us for diameter, length and other related specifications
Total length: As separately discussed

Material

Brass, phosphor bronze, or other by arrangement

Main uses

Connector components for automotive or consumer applications, relay components and more

Product features

The terminals are directly planted on the band (carrier) and winded on reels afterwards. Various band dimensions are available, according to the pitch of each housing, thus increasing the number of pins that can be inserted all at once during your assembly processes, but also improving the tact time of the production line.

Furthermore, please have a look at the following 4 advantages of our bandoliers.

1. All pins have the same insertion direction.
2. Bandolier with or without plating can be handled. It does not matter if you need pre-plating, post-plating or only partial plating, all types are available. Through partial plating it is possible to reduce material costs. We offer Au plating and more.
3. Compared to pressed terminals, a huge reduction of initial equipment costs can be achieved.
4. All 4 sides of the terminals can be plated.

Please have a look at the video below to get an impression of how bandolier pins are manufactured.